The depth of the pots makes it possible to grow plants with a high root system such as roses. The square and round high pots available in our range in relation to their capacity take up a small area of land needed for production. Most of the pots in this category have useful spaces for labels.
DonKwiat square tall flowerpots
Square high pots are an excellent choice for plants which have a deep root system. They work well with roses, mallow, vines and other climbing plants. Their design allows the roots to develop freely downwards which contributes to the beautiful appearance and good condition of the plant. They are also characterised by the fact that they do not take up too much space which is important when growing on a large scale in a nursery setting. The square flowerpots are easy to transport thanks to a system that allows one flowerpot to be inserted into another. The specially shaped rims allow machine feeding.
Square plant pots tall in many sizes
We offer square tall flowerpots in many sizes to suit a wide range of plant species. Their capacity ranges from 0.8l to as much as 25l so you can easily find a pot that meets the needs of your seedlings.
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Effortless machine planting and optimal stacking
The side walls have the right angle of inclination, thanks to which the pots come out “smoothly” one from the other during the machine feeding of pots.
An additional advantage of inclined walls is the efficient stacking of products that allows for economical storage and optimization of transport costs.
The smooth surface of the outer walls reduces friction when removing pots.
1. Step on the wall increases stiffnes of the pot
2. The machine’s edge enables the pot to be picked up by the machine – featured in all our pots
3. A double wall step increases stiffness – featured in selected pot models
Material: ECO
The pots are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
Additional services:
When ordering larger quantities it is possible to choose the color of the pot, print or mark the labels with a bar code. See more
Economical transport:
We make sure that the ordered products reach you in perfect condition, which is why we pack them in several possible ways depending on the type of product. At the client’s request, we can adjust the form and packaging method of our products. If you are considering this option, please contact us to discuss the details.
Flowerpots are placed in columns of different heights depending on the place of product delivery:
1. Poland – the height of the column of flower pots on the palette – 2,10 m
2. Other countries – the height of the column of flower pots on the pallet – 2.45 m
1.Standard packaging
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. PP strip if needed
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
5. spacer on the bottom used for small pots
2. Packaging with additional spacers
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. additional spacers
4. PP strip if needed
5. spacer on the bottom used for small pots
6. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
3. Packaging with additional net
1. black stretch foil
2. net
3. spacer on the bottom used for small pots
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
The construction of square pots provides easy and economical setting of plants.
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Effortless machine planting and optimal stacking
The side walls have the right angle of inclination, thanks to which the pots come out “smoothly” one from the other during the machine feeding of pots.
An additional advantage of inclined walls is the efficient stacking of products that allows for economical storage and optimization of transport costs.
The smooth surface of the outer walls reduces friction when removing pots.
1. Step on the wall increases stiffnes of the pot
2. The machine’s edge enables the pot to be picked up by the machine – featured in all our pots
3. A double wall step increases stiffness – featured in selected pot models
Material: ECO
The pots are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
Additional services:
When ordering larger quantities it is possible to choose the color of the pot, print or mark the labels with a bar code. See more
Economical transport:
We make sure that the ordered products reach you in perfect condition, which is why we pack them in several possible ways depending on the type of product. At the client’s request, we can adjust the form and packaging method of our products. If you are considering this option, please contact us to discuss the details.
Flowerpots are placed in columns of different heights depending on the place of product delivery:
1. Poland – the height of the column of flower pots on the palette – 2,10 m
2. Other countries – the height of the column of flower pots on the pallet – 2.45 m
1.Standard packaging
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. PP strip if needed
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
5. spacer on the bottom used for small pots
2. Packaging with additional spacers
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. additional spacers
4. PP strip if needed
5. spacer on the bottom used for small pots
6. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
3. Packaging with additional net
1. black stretch foil
2. net
3. spacer on the bottom used for small pots
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
Drip lines
Aktualności
A manufacturer of drip lines for irrigation
We are a manufacturer of drip irrigation lines which boast exceptional durability and solidity. Our drip irrigation lines meet the highest standards and are able to significantly reduce the time needed to completely irrigate a crop while saving water. Drip irrigation lines deliver water directly to the root system of the plant, making them very efficient and ensuring that the right amount of water is delivered to all plants. This ensures that the cuttings being grown develop at a similar rate and that none of them are at risk of overwatering. Drip irrigation lines are suitable for outdoor cultivation as well as for growing in a greenhouse or tunnel. They can also be successfully installed in hobby home gardens.
A drip irrigation line is a modern answer to the species diversity of plants grown in Poland. Some of them require frequent and abundant sprinkling, which would not be possible with manual watering. Irrigation lines are automated and almost maintenance-free, which translates into the convenience of such a solution.
As a manufacturer of drip lines, we follow the most modern methods of cultivation and plant care. Our experience and passion means that the drip irrigation lines we offer will certainly not let you down.
To meet the expectations of customers, we offer a number of additional services that allow you to customize the ordered pots for your needs. These services are offered on special request for orders of a minimum of 5 pallets. Due to production requirements, the delivery time will be extended to 1-2 months. If you are interested in these services, please contact us directly.
Labels with a bar code
It is possible to order pots marked with adhesive barcode labels.
Side holes
Many pot models have the option of ordering additional side holes – thanks to them, maximum water drainage is ensured.
Pots from regranulate
We offer you the possibility of ordering pots made from 100% recycled plastic regranulate. The choice of this option supports recycling and environmental protection. Available colors: terracotta, dark green, blue and gray.
Colorful flowerpots
Possibility to order pots in any color of available granulate.
IML print
IML imprint (in-mold label) – is a technique of printing labels that are combined with a pot in the process of plastic injection.
Drip trays are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
As a complement to the offer, we offer containers for cut flowers.
Material: ECO
Drip trays are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
As an extension of the offer we offer transport trays for pots. The T10 Model is suitable for S1 and HS2 pots. T24 Model fits P9 (S 0.5 A) pots
Material: ECO
The pots are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
Speciality Pots
Aktualności
Search
Capacity
Side length / Diameter
Height
Filter
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Nursery pots – professional nursery and greenhouse pots
Specialised nursery pots are used on a daily basis by professional gardeners and nurserymen. These pots allow the fruitful cultivation of many fruit and tree seedlings. The nursery pots are subdivided into pots for growing blueberries pots for growing soft fruit, i.e. pots for strawberries and raspberries and pots for growing trees like Christmas trees and conifers. The individual nursery pots differ in terms of the number of holes on the bottom and on the walls of the pot. Each pot has individual pot parameters that will enable the fastest growth for the plant types dedicated to them.
The pot with feet are used in soft fruit crops such as strawberries, raspberries.
Nursery pots – pots for growing blueberries
Blueberry nursery pots are an innovative way of planting blueberries. These pots have a number of features that allow the blueberry to grow freely and healthily and then bear fruit. A large number of drainage holes and side holes ensure adequate water flow which is crucial for the good condition of young seedlings. In addition they influence the proper aeration of the blueberry roots protecting against excessive moisture and stops development of harmful microorganisms, fungi or mould. The raised bottom insulates the pot from the substrate which helps to maintain the right temperature in the pot. Young plants are particularly sensitive to temperature changes, so protecting their delicate root system is very important.
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Effortless machine planting and optimal stacking
The side walls have the right angle of inclination, thanks to which the pots come out “smoothly” one from the other during the machine feeding of pots.
An additional advantage of inclined walls is the efficient stacking of products that allows for economical storage and optimization of transport costs.
The smooth surface of the outer walls reduces friction when removing pots.
1. Step on the wall increases stiffnes of the pot
2. The machine’s edge enables the pot to be picked up by the machine – featured in all our pots
3. A double wall step increases stiffness – featured in selected pot models
Material: ECO
The pots are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
Additional services:
When ordering larger quantities it is possible to choose the color of the pot, print or mark the labels with a bar code. See more
Economical transport:
We make sure that the ordered products reach you in perfect condition, which is why we pack them in several possible ways depending on the type of product. At the client’s request, we can adjust the form and packaging method of our products. If you are considering this option, please contact us to discuss the details.
Flowerpots are placed in columns of different heights depending on the place of product delivery:
1. Poland – the height of the column of flower pots on the palette – 2,10 m
2. Other countries – the height of the column of flower pots on the pallet – 2.45 m
1.Standard packaging
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. PP strip if needed
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
5. spacer on the bottom used for small pots
2. Packaging with additional spacers
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. additional spacers
4. PP strip if needed
5. spacer on the bottom used for small pots
6. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
3. Packaging with additional net
1. black stretch foil
2. net
3. spacer on the bottom used for small pots
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
Production pots
Aktualności
Search
Capacity
Side length / Diameter
Height
Filter
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Production pots – application, material
Production pots are product that are indispensable in professional greenhouses and nurseries. These pots are distinguished by their lightness, handiness and resistance to breakage. Pots available in our range are personalised to the needs of gardeners. The sturdy material we use to create our production pots has been reinforced with stabilising rims for easy gripping. In addition, the pots have spaces for labels to identify the plants and their planting dates. The industrial pots also have personalised pot bottoms – corrugated and flat with a varying number of holes.
Types of production plant pots
Among the production pots, you will find high pots, standard pots, low pots, as well as round and square pots. This allows you to choose the containers that will best suit your plants’ needs. This, in turn, will enable them to germinate healthily and develop their roots continuously. Different plant species need different growing conditions to develop properly. Climbing plants and roses prefer tall production pots that provide adequate space for the roots to grow downwards. It is important to select the production pots according to the requirements of the seedlings.
A novelty in our offer are hanging pots with a capacity of 4.7 L.
Features of the production pots
The special design of the square-round pots ensures optimal plant growth and precise nutrient dosing. All models in this category are equipped with slots for labelling. Some models are also equipped with holes to ensure adequate drainage of water, which does not accumulate in the pot, which could harm the root system and lead to rotting. The material from which industrial pots are manufactured is extremely durable and can last for a long time and is also suitable for repeated use. Production pots have smooth edges and profiled bevels on the edge which helps with machine packing and allows the pots to be inserted into each other. This significantly optimizes the transport and storage of pots. Our offer also includes chrysanthemum bowls and hanging pots. When ordering a larger number of pots you can choose the color.
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Effortless machine planting and optimal stacking
The side walls have the right angle of inclination, thanks to which the pots come out “smoothly” one from the other during the machine feeding of pots.
An additional advantage of inclined walls is the efficient stacking of products that allows for economical storage and optimization of transport costs.
The smooth surface of the outer walls reduces friction when removing pots.
1. Step on the wall increases stiffnes of the pot
2. The machine’s edge enables the pot to be picked up by the machine – featured in all our pots
3. A double wall step increases stiffness – featured in selected pot models
Material: ECO
The pots are made of 100% recycled polypropylene. Due to the production technology, the product may have delicate streaks resulting from the cooling process of the material.
Additional services:
When ordering larger quantities it is possible to choose the color of the pot, print or mark the labels with a bar code. See more
Economical transport:
We make sure that the ordered products reach you in perfect condition, which is why we pack them in several possible ways depending on the type of product. At the client’s request, we can adjust the form and packaging method of our products. If you are considering this option, please contact us to discuss the details.
Flowerpots are placed in columns of different heights depending on the place of product delivery:
1. Poland – the height of the column of flower pots on the palette – 2,10 m
2. Other countries – the height of the column of flower pots on the pallet – 2.45 m
1.Standard packaging
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. PP strip if needed
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
5. spacer on the bottom used for small pots
2. Packaging with additional spacers
1. transparent stretch film or foil sleeve
2. cardboard angle bar if needed
3. additional spacers
4. PP strip if needed
5. spacer on the bottom used for small pots
6. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
3. Packaging with additional net
1. black stretch foil
2. net
3. spacer on the bottom used for small pots
4. pallet in 1 of 3 sizes: 120×100, 120×80, 110×90
Pots
Search
Capacity
Side length / Diameter
Height
Filter
This is a placeholder tab content. It is important to have the necessary information in the block, but at this stage, it is just a placeholder to help you visualise how the content is displayed. Feel free to edit this with your actual content.
Legend of markings:
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
Pots are a refuge for every plant. In our range you will find pots dedicated to large-scale cultivation in nursery farms, greenhouses, but also pots suitable for gardening enthusiasts.
We offer additional services such as special colours of pots, prints and barcode labeling.
Types of production flowerpots
Among the production pots you will find high pots, standard pots, low pots, as well as round and square pots. This allows you to choose the containers that will best suit your plants’ needs. This will enable them to germinate healthily and develop their roots continuously.
Our wide range of production pots, specialised nursery pots will allow you to choose the containers that best suit your plants’ needs. Among them we offer production pots high, standard and low. In our portfolio you will find square flowerpots and round flowerpots.
We also stock nursery pots dedicated to the specific plants needs. Like flowerpots for blueberries, conifers, flowerpots for raspberries and strawberries and other soft fruits.
This product category also includes products useful for nursery farms and horticulture such as transport trays, saucers and flower containers.
For the above products, we also offer the possibility of personalising your order, i.e. a wider choice of pot colours or specific IML prints.
Within this product category, we offer the possibility of additional services, such as labelling the pots with barcode labels or making additional side holes. All our flowerpots are made from 100% recycled material.
– standard grooved bottom with holes – universal bottom for use on hard and soft ground.
– grooved bottom with more openings – bottom with more openings increasing drainage.
– bottom with mesh – the mesh provides greater drainage and air flow.
– flat bottom with low feet and holes – bottom used in agrotextile farming.
– flat bottom with high feet and holes – high feet allow hydroponic farming.
– hole for 2.5cm wide label.
– hole for 3cm wide label.
– hole for 4cm wide label.
– side openings on the entire wall – thanks to these openings, the plant takes up the ingredients from the surrounding soil.
– possibility to order side openings with larger orders – additional holes increase drainage.
– folded edge for lifting the flowerpot – a convenient handle helping carrying large flower pots.
– one enlarged step stiffening the flower pot.
– double step wall stiffening the pot.
– higher single step stiffening the pot.
– the flowerpot fits the tray offered by DonKwiat.
– fits into a thermoformed tray from other manufacturers.
